Appendix 1.13 Handheld Terminal - Intec MLC 8000 Operating Manual

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
LCD resolution
Backlight

Appendix 1.13 Handheld terminal

Pin Description
1 +24V
2 0(24V)
3 C+
4 C-
Characteristics and features:
- Service tool for lift controller MLC-8000
- can be connected to any connector on control bus (CAN bus 1) or shaft bus
(CAN bus 2)
- Complete control of HSE and lift controller from any place
- handheld terminal connectors are available by default on HSE, FVE, TVE
and LCD-057
- Plug and unplug while power is on even if lift is running
- LCD display 16*4 characters with backlight
Technical specifications:
Temperature range:
Max. power consumption by 24V:
Mechanical dimensions:
Cable length:
In order to connect the handheld terminal to FVE hardware version 1.1 an adapter
cable with Mini DIN connector is required.
640 * 480 Pixel, 24 Bit colour depth RGB
Pixel size 0,0588*0,1764mm
LED
Function
+24V Power supply input
0V Power supply input
CAN-Bus – High signal
CAN-Bus – Low signal
0°C to +60°C
ca. 70mA @ 25°C
Width:
Length:
Height:
2m
90mm
200mm
35mm