Intec MLC 8000 Operating Manual page 2

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
© 2016 INTEC GmbH Ingenieurservice. All rights reserved.
This manual and the product described within are protected by Copyright rights under the
reservation of all rights for the INTEC GmbH Ingenieurservice. According to copyright laws,
this manual may not be copied in whole or service engineer without written permission from
INTEC GmbH Ingenieurservice in part, except in the normal course of use of the product or
for creating backup copies. However, this exemption does not extend to copies that are
created by third parties and sold to or in other manner transferred to. However, the entire
material purchased (with all backup copies) can be sold to third parties, be handed over to
or provided on loan. According to the provisions of the Act, the production of a translation
also falls under the definition of copying.
The INTEC GmbH Ingenieurservice accepts no responsibility or guarantee for the
content of this manual. It rejects all implied warranties of merchantability or eligibility
for a particular purpose.
The INTEC GmbH Ingenieurservice is not legally responsible for errors contained within or
for any indirect or consequential damages in connection with the transfer, performance, or
use of this manual. The INTEC GmbH Ingenieurservice reserves the right to revise this
manual from time to time without pre notice and to make changes to the content.
The operation is not allowed in the US and countries of similar laws.
2/196