Intec MLC 8000 Operating Manual page 184

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
2 EAF9
3 EAF10
4 EAF11
5 EAF12
6 EAF13
7 EAF14
8 EAF15
9 EAF16
10 +24A
11 +24V
12 GND
13 +24V
14 NL
15 +24A
16 M
17 L
18 CH+
19 CH-
20 GND
XT7 Flat cable connection to FVE Version 1.1 (Connector XF4) or to connect to car call boards
with flat cable connection (Fa. KLST)
1 NR
2 EAF10
3 EAF11
4 EAF12
5 EAF13
6 EAF14
7 EAF15
8 EAF16
9 0(24V)
10 +24V
11 NL
12 +24A
13 M
14 L
XT8 Slot 1 for connecting a UEA to power supply and CAN bus
XT9 Slot 1 for connecting a UEA to power supply and CAN bus
BZ1 Buzzer
KT1 Alarm call relay
Characteristics and features:
Distribution board and emergency light for use in car operation panel COP
- 24 white LED for area-wide lighting of emergency light window in car operation panel COP
- electric buzzer for use as overload signal, door close signal and / or car call acknowledgement (set
by parameter); if flat cable is used as connection to FVE the buzzer ist connected to output AF9 of
FVE.
- Alarm call relay with potential-free changeover contact
- Slots for connecting the UEA boards
- Connector for handheld terminal
Technical specifications:
8 connected inputs / outputs of FVE (E9-E16 and A9-A16
0V switching)
Connector 2 (EAF9) is connected with the onboard buzzer of TVE
Battery buffered 24V power
+24V power
0V power
+24V power
Emergency light car operation panel COP (output A7 FVE)
Battery buffered 24V power
Intercom microphone
Intercom loudspeaker
CAN-Bus – High signal
CAN-Bus – Low signal
0V power
Alarm call car operation panel COP
7 connected inputs / outputs of FVE (E10-E16 and A10-A16
0V switching)
0V power
+24V power
Emergency light car operation panel COP (output A7 FVE)
Battery buffered 24V power
Intercom microphone
Intercom loudspeaker