Intec MLC 8000 Operating Manual page 52

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
1. Menu level 2. Menu level 3. Menu level 4. Menu level
Targ.dist.
Type
LC no dr.
LC change
Time [s]
Speech unit
Speech [ms]
Delay
Targ.dist.
Anti nuisance
CC undo
LC dir. dep.
Max. CC no.
52/196
Specifies at what distance before target floor level (in mm), the
acoustic signal (gong) is switched on.
If this parameter is set to 0, the gong sounds if the lift starts door
Arrival: The gong sounds only when entering a floor
Door open: The gong sounds while opening the door; even if the liftis
already located in that floor while the call was placed.
Indicates whether the gong should also sound when the lift handles a
landing call in a floor for which doors were not set (lift only goes to the
floor, but do not open any doors)
pecifies whether the gong should sound again if the lift handled an up
or down landing call, but no car call is placed in the selected direction
and accordingly the other landing call (to opposite direction) is being
Pulse duration of the Gong signal.
If the value is set to '0', then the gong signal remains active as long as
Parameters for controlling a speech unit
Pulse duration of signals for controlling a voice unit
Time delay between setting of floor signals for voice output and
[ms]
Distance before entering the target floors, in which the speech unit will
Parameters for avoiding call misuse
no: a car call can not be cleared by the lift user
single: By pressing an acknowledged car call again this car call is
double: By quick double pressing an acknowledged car call this car
Prior.: By quick double pressing of a car call button an advanced car
call is set or an already acknowledged car call is changed to an
No: Even if the lift has 2 landing calls in each floor (for upwards and
downwards direction) the lift controller will clear both calls if the lift
Yes: The lift controller always handles just the landing call in the
This parameter may limit the maximum number of car calls that the lift
Description
opening.
handled.
the lift stands in a floor.
setting the "Enable" signal.
indicate the floor.
cleared.
call is cleared.
advanced car call.
arrives this floor
actual direction