Intec MLC 8000 Operating Manual page 3

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
Version number:
The present description is based on the software version 1.39 of the main board HSE.
Due to new requirements in the lift control field, a continuous development of the lift
controller MLC 8000 is taking place. While compatibility with older software versions
will always be preserved, so that the present description stays also applicable to
newer or older versions of the control. There might be some features in newer
versions of this specification which are not included, as well as some features of this
description which might not carried out yet in older control versions.
3/196