Intec MLC 8000 Operating Manual page 169

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
Position Terminal no.,
Description
3 N-FK
4 N-FK
5 FKL
6 L_FK
7 L_FK
8 VEN
XF17 1 SKK
2 SKF
3 SKI
4 SKD
5 SKT
6 SKZ
7 N_FK
8 L_FL
9 Res.
XF18 Connector for Software download
XF19 1 +24V
Only
2 IE
FVE1.1
XF20 1 Frei
2 Frei
Only
3 C-
FVE1.1
4 0(24V)
5 C+
6 +24A
XF20 1 +24A
2 0(24V)
Only
3 C+
FVE2.1
4 C-
XF21 Modul 1
XF22 Modul 2
LED
Technical specifications:
Temperature range:
Max. power consumption by 24V:
Max. input current 24V inputs:
Max. current KF1 to KF6:
Max. output current A9-16
Max. input current 230V DC input(car light):
Mechanical dimensions:
Function
Car light; switched by relay KF5 (output A5)
Car light power, monitoring of car light (input E28, 110V / 230V AC)
Car ventilator, switched by relay KF6 (output A6)
Trailing cable, safety circuit to car
Trailing cable, safety circuit behind safety gear
Trailing cable, safety circuit behind inspection
Trailing cable, safety circuit behind revolving door
Trailing cable, safety circuit behind car door
Trailing cable, safety circuit behind inspection for door zone bypass
Trailing cable, neutral of car light power supply
Trailing cable, car light power supply, monitored by input E28 (110V / 230V
AC)
Trailing cable, free wire, onboard connected to XF9.3
Connector for additional inspection relay; onboard connected to XF12.6
Mini-DIN connector for handheld terminal (CAN-Bus, battery buffered 24V
power supply)
Connector for handheld terminal (CAN-Bus, battery buffered 24V power
supply)
Slot 1 for connecting a UEA to power supply and CAN bus
For configuration see description of Jumper XFJ1
Slot 1 for connecting a UEA to power supply and CAN bus
For configuration see description of Jumper XFJ2
LED "Software is running"
0°C to +60°C
<200mA @ 25°C (all relays and in-/outputs active)
10mA @ 25°C / Input
8A/250V AC / Relay
500mA @ 25°C / Output
10mA @ 25°C, 230VAC, 50Hz
Length:
Width:
225mm
130mm