Hardware Encoding - Intec MLC 8000 Operating Manual

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0

1.4 Hardware encoding

Upon customer request all control modules can be fitted with a custom specific coding. Only
modules with identical hardware encoding can work together in an lift controller. Thus, if, for
example, a TSE board was connected with other hardware encoding of such the system, this
module will be "ignored" completely (it appears the error message "Wrong Code TSE xxx" in
the error stack HSE).
In the default state, the entire system is unprotected and control modules can be freely
interchanged.
15/196