Intec MLC 8000 Operating Manual page 34

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
1. Menu level 2. Menu level 3. Menu level
ESE 1.1 Outputs
...
ESE 64.8
ESE64.8 Inputs
ESE64.8 Outputs
Add PCB
Remove PCB
Copy PCB
4. Menu level
8:
1:
...
8:
1:
...
8:
1:
...
8:
Finally the new ESE is only added if at least 1 input or output function
Node ID
Branch No.
Add ESE
With this menu item an unused landing panel unit ESE will be deleted
Node ID
Branch No.
Remove ESE
Source ID
34/196
Description
Function of input 8 of ESE1, branch 1
Function of output 1 of ESE1, branch 1
...
Function of output 8 of ESE1, branch 1
Function of input 1 of ESE64, branch 8
...
Function of input 8 of ESE64, branch 8
Function of output 1 of ESE64, branch 8
...
Function of output 8 of ESE64, branch 8
With this menu item another landing panel unit ESE can be added
(max. 512).
is defined for this TSE.
Set node ID of new ESE board
Set branch number of new ESE board
Add ESE board with the defined node ID and branch number (see
above)
(it will delete all input-output functions of the ESE)
Node ID of the ESE which will be deleted
Branch numnber of the ESE which will be deleted
Remove ESE with the above entered node ID and branch number
Copy all parameters of one ESE to another
Node ID of ESE, of which the parameters are to be copied