Honda CB900F Service Manual page 406

REMOVAL
Remove the screws and headlight unit.
Disconnect the headlight bulb connector (page 19-4).
Remove the position light bulb socket (page 19-4).
Remove the w ires from the clamps.
Remove the bolts, clamps/nuts and headlight case.
Remove the w ires from the headlight case.
INSTALLATION
Install the wires to the headlight hole.
Install the headlight case, then align the index line of
the headlight case and turn signal light bracket.
Install the bolts, nuts/clamps and tighten them.
Route the wires Install the wires to the clamp as shown .
properly
lpagel -22J.
LIGHTS/METERS/SWITCHES
CLAMPS
19-5