Honda CB900F Service Manual page 189

ENGINE REMOVAL/INSTALLATION
ENGINE INSTALLATION
The jack height m ust be continually adjuste d to
relieve stress from the moun ting fastene rs.
Route the w ire and cables prope rly (page 1·23).
NOTE:
Be sure to tig hten all engine mounting fasteners to
the specified torque.
Carefully install the engine into the frame .
Loosely install the rear upper and rear lower engine
hanger bolts/nuts .
Loosely install the right and left side of t he front
engine hanger bolt, nut and distance collar.
Tighten all the engine hanger bolts to th e specified
tor que.
TORQUE:
R./L. front engine hanger bolts/nuts:
50 Nom (5.1 kqf-rn , 37 lbf- tt )
Rear lower engine hanger bolts/nuts:
50 Nom (5.1 kgfom. 37 Ibfoft )
Rear upper eng ine hanger bolts/nuts:
50 Nom (5.1 kqf-rn, 37 lbf-ft)
lighten the right side of the front engine hanger bolt
to the specified to rque.
7-6
REAR LOWER ENGINE HAN GER
BOLT/ NUT
REAR LOWER ENGINE HA NGER
BOLT/NUT
FRONT ENGINE HAN GER BOLT/NU T