FUEL SYSTEM (Programmed Fuel Injection)
Connect the vacuum tube to the one-way valve
.
Connect the crankcase breather tube to the air
cleaner housing.
Connect the PAIR control valve air suction tube and
intake
vacuum tubes to the air cleaner housing.
Connect the MAP sensor connector and vacuum tube
.
INSTALLATION
Install the
air
cleaner housing/throttle body from the
left
side of the frame.
Tighten the cylinder head side insulator band so that
the
insulator
band distance is 4
±
1 mm (0.2
±
0.04
in)
.
Install the IAT sensor 2P
connector.
Install the air cleaner housing mounting bolt
.
Install and tighten the
by-starter
valve knob stay
bolt.
5-56
4
±
1 mm (0.2
±
0.04
in)
2P CONNECTOR
~~====:::-
BOLT