Honda CB900F Service Manual page 352

HYDRAULIC BRAKE
Remove and discard the brake pedal joint cotte r pin.
Remove the joint pin .
Remove the master cylinder mounting bolts, step
guard and master cylinder.
DISASSEMBLY
Disconnect the reservoir hose from the reservoir hose
joint.
Remove the screw and reservoir hose joint from the
master cylinder.
RESERVOIR JOINT
Remove the boot.
Remove the snap ring from the master cylinder body
using the special tool as shown .
TOOL :
Snap ring pliers
07914-SA50001
BOOT
SNAP RING
SNAP RINGPLIERS
I
Remove the push rod, master piston, primary cup and
spring .
Clean the inside of the cyl inder w ith brake fluid .
15-16
SPRING
-.
,
~ J'
,,,8'\
#'(\
PUSH ROD Assy. MASTER PITON