Honda CB900F Service Manual page 182

Connect the water pump-ta -water joint hose Install
the water pump cover, two SH bolts and two flange
bolts.
Tighten the flange bolts to the specified torque .
TORQUE : 12 N'm (1.2 kqf-rn, 9 Ibfoft l
Tighten the two SH bolts.
Connect the lower radiator hose and bypass hose,
then tighten the clamp screws.
Fill the system with recommended coolant (page 6·5) .
Install the lower cowl (page 2·5) .
RADIATOR RESERVE TANK
REMOVAL
Remove the rear shock absorber (page 14·10) .
Disconnect the siphon tube and drain coolant from
the reserve tank.
Remove the radiator reserve tank.
Drain the coolant.
INSTALLATION
Installation is in the reverse order of removal.
Install the flange collar and washer as shown.
Install the rear shock absorber (page 14·13) .
COOLING SYSTEM
6-15