Honda CB900F Service Manual page 142

FUEL SYSTEM (Programmed Fuel Injection )
Remove the IAT sensor 2P conne ctor.
Remove the air cleaner housing mounting bolt.
Loosen the insulator band screws
(cylinder head side) .
Disconnect the throttle body from the cylinder head .
Remove the air cleaner housing/throttle body from
the left side of the frame.
NOTE:
Seal the cylinder head intake ports with tape or
a
clean cloth to keep dirt and debris from entering the
intake ports after the throttle body has been removed .
DISASSEMBLY
Remove the vacuum tube from the one -way valve .
Remove the screws from the air cleaner housing and
separate the housing.
5-54
2P CONNECTOR/,,:== = = = =-
BOLT
BAND SCREWS
VACUUM TUBE
HOUSING
I