Honda CB900F Service Manual page 350

HYDRAULIC BRAKE
Apply silico n grease to the boot inside.
Install the boot.
Install th e brake li ght switch an d t ighten the screw to
the specified torque .
TORQU E: 1 Nom 10 .1 kgfom . 0.7 Ibfoft)
Apply silicone grease to the contact surfaces of the
brake lever and pisto n tip .
Install the brake lever assembly, tighten the pivot bolt
to the specified torque .
TORQUE: 1 Nom 10.1 kgfom. 0.7 Ibfoft)
Hold t he pivot bo lt and tig hten t he pivot nut to th e
specified torque.
TORQUE : 6 Nom 10.6 kgfom . 4.3 Ibf·ftl
15-14
- §
:00
~.~t;f···}J;
-
. .-. _",0 """"-
.
-' -
- - \9
SCREW
PIVOT BOLT
I
BRAKE LEVER ASSEMBLY
~PIVOTNUT