Honda CB900F Service Manual page 324

/
Mount the wheel , tire and brake disc assembly on an
inspection stand.
Spin the wheel, allow it to stop, and mark the low-
est(heaviest) part of the wheel w ith chalk.
Do this two or three times to verify the heaviest area .
If the wheel is balanced, it will not stop consistently in
the same position .
To balance the wheel, install balance weights on the
lightest side of rim, the side opposite the chalk marks.
Add just enough weight so the wheel will no longer
stop in the same pos it ion when it is spun.
Do not add more than 60 9 (2.1 oz) to the rear wheel.
INSTALLATION
Apply grease and install the new dust seal to the
right side.
Apply grease and install the dust seal to the left side.
Apply grease to the side collars inside and
grooves.
Install the side collars.
REAR WHEEL/SUSPENSION
14-9