Honda CB900F Service Manual page 149

FUEL SYSTEM (Programmed Fuel Injection)
ASSEMBLY
Connect the throttle cab le ends to the throttle drum .
Check the insulator band angle.
Install the insulators onto the throttle body.
Tighten the throttle body side insulator band so that
the insulator band distance is 7
±
1 mm (0.3
±
0.04 in) .
Apply oil to the insulator inside surfaces for ease of
throttle body installation.
Connect the vacuum tube to the throttle body.
BAND SCREWS
7 ±1mm
(0.3
±
0.04 in )
5-61