Honda CB900F Service Manual page 325

REAR WHEEL/SUSPENSION
Install the rear brake caliper bracket onto the guide of
the swingarm.
Be careful not to
damage the brake
pads.
Place the rear wheel into the swingarm .
Install the drive chain over the driven sprocket .
Install the rear axle from the left side.
Install the washer and ax le nut.
Adjust the drive chain slack (page 3-10) .
Tighten the axle nut to the specified torque .
TORQU E: 93 N'm (9.5 kq f-m, 69 lbf-ft]
SHOCK ABSORBER
REMOVAL
Remove the seat (page 2-21.
Remove the side cover (page 2-2) .
Secure the motorcycle using a hoist or an equivalent.
Loosen the shock abso rber reservoir band screw and
remove the reservoir from the inner fender.
14- 10
BA ND
SCREW