FUEL SYSTEM (Programmed Fuel Injection)
Connect the fuel injector 8P connector.
Connect the No.4 fuel injector 2P
connector.
Connect the crankcase breather tube to the air
cleaner housing
.
Install the vacuum tubes to
the
intake air duct control
solenoid valve
.
Connect the intake air duct control solenoid valve
2P
connector.
Connect the cam pulse generator 2P
connector.
Install the following:
- air cleaner element (page 3-5)
- fuel tank (page 5-51)
Connect the throttle cables to the throttle pipe (page
13-91.
VACUUM TUBES
5-57