Honda CB900F Service Manual page 227

RIGHT CRANKCASE COVER REMOVAL
Drain the engine oil (page 3-15).
Remove the bolts and clutch cable guide, then
disconnect the clutch cable end from the clutch
lifter lever.
CLUTCH/GEARSHIFT LINKAGE
CLUTCH CABLE
The lifter arm
spindle is
engaged with the
clutch lifter piece
inside the right
crankcase cover.
Remove the right crankcase cover SH bolts and clutch
cable guide.
Remove the right crankcase cover while turning the
clutch lifter arm counterclockwise to disengage the
lifter arm spindle from the lifter piece.
Remove the two dowel pins and gasket.
Clean the right crankcase cover mating surfaces.
9-3