Honda CB900F Service Manual page 285

FRONT WHEEL/SUSPENSION/STEERING
HANDLEBARS
HANDLEBAR REMOVAL
Re move the screw from the right grip end.
GRIP END
SCREW
Keep the brake
master cylinder
upright to prevent
air from entering
the hydraulic s ys-
tem.
Remove the right rearv iew mirror.
Disconnect the front brake light switch wire connec -
tors from the switch .
Disconnect the front brake sw itch wire connectors
from the sw itch.
Remove the master cylinder holder bolts, holder and
master cylinde r assembly.
MASTER CYLINDER
CONN ECTOR BOLTS
Remove the right handlebar switch/throttle hous ing SWITCHrrHROTTLE HOUSING
screws .
Loosen the throttle cable lock nuts and adjusting nut.
13-3