Honda CB900F Service Manual page 247

STARTER CLUTCH
INSPECTION
Check the operation of the one-way clutch by turning
the driven gear.
You should be able to turn the driven gear counter-
clockw ise smoothly, but the gear should not turn
clockwise.
DISASSEMBLY
Remove the starter driven gear by turning it counter-
clockwise.
ALTERNATOR/STARTER CLUTCH
Remove the starter one-way clutch assembly.
Hold the flywheel with a flywheel holder, and remove
the starter clutch mounting torx bolts.
TOOL:
Flywheel holder 07725-1)040000
(Equivalent commer-
cially available)
TORX BOLTS
- -
Check the starter driven gear for abnormal wear or
damage.
Measure the starter driven gear boss 0.0.
SERVICE LIMIT: 51.684 mm 12.0348 in)
Check the one-way clutch for wear or damage and
replace if necessary.
ON E-WAY CLUTCH
I
10-5