Honda CB900F Service Manual page 322

REAR WHEEL/SUSPENSION
Install the d ista nce colla r
Drive in t he left side bearin g us ing the sam e too ls.
Drive the dri ven fla nge bear ing out usin g the special
too ls.
0774~010000
07746-1870100
07746-0040500
TOOLS:
Driver
Attachment. 28 X 30 mm
Pilot, 20 mm
Never install the
old bearings, once
the bearings have
been removed,
the bearings must
be replaced with
new ones.
Driven fla nge bea ring installation
Dr ive t he new d riven flange bearing in to the driven
f lange us ing th e spec ial too ls.
TOOLS:
Driver
Attachmen1. 52 X 55 mm
Pilot . 20 mm
0774~010000
07746-0010400
07746-0040500
OUTER DRIVER
PILOT
Inst all the wheel damper rubbe rs int o the wheel hub.
Apply ' oil to the new O-r ing and install it into the
groove of the wheel hub .
If the driven sprocket was re moved, install t he driven
sprocket and temporarily tighten the nuts.
SPROCKET
14-7