Clear Spanning-Tree Detected-Protocols - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
•
flooding—Flood BPDU packets when spanning-tree is disabled on an interface.
Default Configuration
The default definition is flooding.
Command Modes
Global Configuration mode
User Guidelines
Use this command when STP is disabled on the PowerConnect 6024/6024F.
Example
The following example defines BPDU packet flooding when spanning-tree is disabled on an
.
interface
Console(config)# spanning-tree bpdu flooding
clear spanning-tree detected-protocols
The clear spanning-tree detected-protocols privileged EXEC command restarts the protocol
migration process (force the renegotiation with neighboring switches) on all interfaces or on the
specified interface.
Syntax
clear spanning-tree detected-protocols [ethernet interface number | port-channel port-
channel-number]
•
interface—A valid Ethernet port.
•
port-channel-number—A port-channel index.
Default Configuration
If no interface is specified, the action is applied to all interfaces.
Command Modes
Privileged EXEC mode
User Guidelines
This feature should be used only when working in RSTP mode.
Example
The following example restarts the protocol migration process (forces the renegotiation with
neighboring switches) on g1.
Console# clear spanning-tree detected-protocols ethernet g1
376
Spanning-Tree Commands
Advertisement
Table of Contents
