Sntp Client Poll Timer; Sntp Broadcast Client Enable - Dell PowerConnect 6024F Command Line Interface Reference Manual

sntp client poll timer

The sntp client poll timer global configuration command sets the polling time for the Simple
Network Time Protocol (SNTP) client. To return to default, use the no form of this command.
Syntax
sntp client poll timer seconds
no sntp client poll timer
• seconds — Polling interval in seconds (Range: 60-86400)
Default Configuration
Polling interval is 1024 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the polling time for the Simple Network Time Protocol (SNTP) client
to 120 seconds.
Console(config)# sntp client poll timer 120

sntp broadcast client enable

The sntp broadcast client enable global configuration command enables Simple Network Time
Protocol (SNTP) Broadcast clients. To disable SNTP Broadcast clients, use the no form of this
command.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Configuration
SNTP Broadcast clients are disabled.
Command Mode
Global Configuration mode
106
Clock