Sntp Client Poll Timer; Sntp Broadcast Client Enable - Dell PowerConnect 5424 Command Line Interface Manual

sntp client poll timer

The sntp client poll timer Global Configuration mode command sets the polling time for the Simple
Network Time Protocol (SNTP) client. Use the no form of this command to return to default.
Syntax
• sntp client poll timer seconds
• no sntp client poll timer
• seconds — Polling interval in seconds (Range: 60 - 86400)
Default Configuration
SNTP client polling time is1024 seconds.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Examples
The following example sets the polling time for the Simple Network Time Protocol (SNTP) client to 120
seconds.
Console (config)# sntp client poll timer 120

sntp broadcast client enable

The sntp Broadcast client enable Global Configuration mode command enables the Simple Network
Time Protocol (SNTP) Broadcast clients. Use the no form of this command to disable the SNTP
Broadcast clients.
Syntax
• sntp broadcast client enable
• no sntp broadcast client enable
This command has no arguments or keywords.
Default Configuration
SNTP Broadcast clients disabled.
Command Mode
Global Configuration mode.
129
Clock