sntp client poll timer
The sntp client poll timer Global Configuration mode command sets the polling time for the
Simple Network Time Protocol (SNTP) client. To return to default configuration, use the no
form of this command.
Syntax
sntp client poll timer seconds
no sntp client poll timer
•
seconds — Polling interval in seconds (Range: 60-86400)
Default Configuration
Polling interval is 1024 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the polling time for the Simple Network Time Protocol (SNTP)
client to 120 seconds.
Console(config)# sntp client poll timer 120
sntp broadcast client enable
The sntp broadcast client enable Global Configuration mode command enables Simple
Network Time Protocol (SNTP) broadcast clients. To disable SNTP broadcast clients, use the
no form of this command.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Configuration
The SNTP broadcast client is disabled.
Command Mode
Global Configuration mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
125
Clock