REP 7.2 Tray 5 Feed Roll
Parts List on
PL 2.14
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove Rear Cover
(REP
14.2).
2.
Remove the Rear Left Upper Cover
3.
Remove the Rear Left Middle Cover
4.
Close the Left Cover Assembly.
5.
Remove Tray 5
(REP
7.1).
6.
Remove the Chute
(Figure
1).
a.
Remove Screws (3).
b.
Lift to remove Chute.
Chute
Figure 1 Removing Chute
7.
Remove the Feed Roll
(Figure
2).
a.
Release Locking Tab from groove on shaft and slide Lock Roll away from Feed Roll.
b.
Slide Feed Roll to disengage drive pin and remove Feed Roll.
Repairs and Adjustments
REP 7.2
WARNING
(REP
14.5).
(REP
14.4).
Screws (3)
Figure 2 Removing Feed Roll
Replacement
Ensure Arrow is positioned as shown
Figure 3 Installing Feed Roll
09/03
4-56
Feed
Roll
Lock Roll
Locking
Tab
(Figure
3).
Arrow
DC 3535/2240/1632, WC M24
Initial issue