fip-snooping fc-map
Configure the FC-MAP value FIP snooping uses on all VLANs.
S4810 and MXL Switch
Syntax
fip-snooping fc-map fc-map-value
To remove the configured FM-MAP value, use the no fip-snooping fc-map command.
Parameters
fc-map-value
Defaults
0x0EFC00
Command Modes
Command History
Version 8.3.12.0
Version 8.3.16.0
fip-snooping port-mode fcf
Configure the port for bridge-to-FCF links.
S4810 and MXL Switch
Syntax
fip-snooping port-mode fcf
To disable the bridge-to-FCF link on a port, use the no fip-snooping port-mode fcf
command.
Command Modes
INTERFACE
Command History
Version 8.3.12.0
Version 8.3.16.0
Usage
The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.
Information
628
Enter the FC-MAP value FIP snooping uses. The range is 0EFC00 to
0EFCFF.
•
CONFIGURATION
•
VLAN INTERFACE
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.