Ip Route Configuration Commands; Show Ip Route Command; Set Ip Route Command - Avaya P130 User Manual

IP Route Configuration Commands

Show ip route Command

Use the show ip route command to display IP routing table entries.
The syntax for this command is:
show ip route
Example:
P130-N> show ip route
Destination Gateway
----------- -----------
149.49.1.1 172.20.22.201
190.20.0.0 172.20.22.202
172.20.0.0 172.20.22.96

Set ip route Command

Use the set ip route command to add IP addresses to the IP routing table.
The syntax for this command is:
set ip route <destination> <gateway>
<destination>
<gateway>
Example:
This example shows how to add a default route to the IP routing table:
P130-1# set ip route 149.49.48.0 192.122.173.42
Route added.
Avaya P130 User's Guide
IP address of the network, or specific host to be added
IP address of the router.
Chapter 6 Avaya P130 CLI
97