Copy Tftp Startup-Config Command; Copy Running-Config Tftp Command; Copy Running-Config Startup-Config Command - Avaya P334T-ML User Manual
Stackable switch
Hide thumbs
Also See for P334T-ML:
- Installation and configuration manual (178 pages) ,
- Installation and configuration manual (176 pages) ,
- Quick start manual (38 pages)
Table of Contents
Advertisement
copy tftp startup-config Command
Use the copy tftp startup-config command to copy the P332-ML
configuration from the saved TFTP file to the Startup Configuration NVRAM.
The syntax for this command is:
copy tftp startup-config <filename> <ip>
filename
ip
Example:
copy tftp startup-config
copy running-config tftp Command
Use the copy running-config tftp command to copy the P332-ML
configuration from the current VRAM Running Configuration to the TFTP file.
The syntax for this command is:
copy running-config tftp <filename> <ip>
filename
ip
Example:
Router-N> copy running-config tftp c:\p332\router1.cfg
192.168.49.10
copy running-config startup-config Command
Use the copy running-config startup-config command to copy the
P332-ML configuration from the current VRAM Running Configuration to the
Startup Configuration NVRAM.
The syntax for this command is:
copy running-config startup-config
P334T-ML User's Guide
file name (full path)
The ip address of the host
c:\p332\router1.cfg 192.168.49.10
file name (full path)
The ip address of the host
Chapter 7
CLI – Layer 3
155
Advertisement
Table of Contents
