Configure; Copy L2-Config Tftp; Copy Tftp Ew_Archive - Avaya P460 Reference Manual

If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

configure

User level: read-write, admin.
Use the configure command to enter configure mode.
The syntax for this command is:
command
Example:
P460-1(super)# configure
P460-1(configure)#

copy l2-config tftp

User level: read-write, admin.
Use the copy l2-config tftp command to upload the Layer 2 parameters from
the current NVRAM running configuration to a file via TFTP.
To use this command, you need to have an active tftp server, and to create a file
into which to download the data.
If Avaya MultiService Network Manager is running, you do not require an
additional TFTP server.
The syntax for this command is:
copy l2-config tftp <filename> <ip>
filename
ip
Example:
P460-1# copy l2-config tftp c:\p460\config 149.49.152.36

copy tftp EW_archive

User level: read-write, admin.
Use the copy tftp EW-archive command to download the P460 Manager
application into the switch via TFTP.
Avaya P460 Reference Guide
file name (including full path)
IP address of the host
Chapter 2 Avaya P460 CLI Commands
23