Upgrade And Downgrade Instructions For Junos Os Release 10.3 For J-Srx Series Services Gateways; Switches; New Features In Junos Os Release 10.3 For J-Ex Series Ethernet Switches; Access Control And Port Security - Dell PowerConnect J-8208 Release Note

Release notes junos version 10.3
Hide thumbs Also See for PowerConnect J-8208:
Table of Contents

Advertisement

Junos 10.3 OS Release Notes
Upgrade and Downgrade Instructions for Junos OS Release 10.3 for J-SRX Series Services
Gateways
Junos OS Release Notes for Dell PowerConnect J-EX Series Ethernet Switches

New Features in Junos OS Release 10.3 for J-EX Series Ethernet Switches

52
NOTE: The policy should permit SCTP traffic.
In order to upgrade to Junos OS Release 10.3 or later, your device must be running Junos
OS Release 10.1R2 or later.
For additional upgrade and download information, see the Junos OS Administration Guide
for Security Devices and the Junos OS Migration Guide.
Outstanding Issues in Junos OS Release 10.3 for J-EX Series Ethernet
Switches on page 57
New features in Release 10.3 of Junos OS for J-EX Series Ethernet switches are described
in this section.
Not all J-EX Series software features are supported on all J-EX Series Ethernet switches
in the current release. For a list of all J-EX Series software features and their platform
support, see the software overview information in the Dell PowerConnect J-EX Series
Ethernet Switch Complete Software Guide for Junos OS at
New features are described on the following pages:
Access Control and Port Security on page 52
Packet Filters on page 53

Access Control and Port Security

Captive portal authentication functionality enhancements
authentication functionality are removed. Captive portal functionality no longer requires
that a routed VLAN interface (RVI) be created or that the switch's DHCP gateway IP
address be configured as the IP address of the RVI.
.
-Limitations on captive portal

Advertisement

Table of Contents
loading

Table of Contents