Konica Minolta bizhub C658 Service Manual page 713

bizhub C658/C558/C458/C368/C308/C258
2. Remove the front cover.
G.8.23.2 Front cover (JS-602)
3. Remove the rear cover.
G.8.23.3 Rear cover (JS-602)
[2] [1]
8.23.5 Entrance switching solenoid (SD401) (JS-602)
1. Remove the rear cover.
G.8.23.3 Rear cover (JS-602)
[2]
[1]
[2]
[1]
5. To reinstall, reverse the order of removal.
[3]
4. Remove two screws [1], disconnect the connector [2], and remove the job
separator [3].
2. Remove the harness from the wire saddle [1] and the edge cover [2].
3. Disconnect the connector [3].
4. Remove the screw [1] and remove the entrance switching solenoid [2].
G-413
G DISASSEMBLY/REASSEMBLY > 8. Option