Konica Minolta bizhub C658 Service Manual page 508

bizhub C658/C558/C458/C368/C308/C258
[1] [2]
[2]
[1]
8. To reinstall, reverse the order of removal.
NOTE
▪ When installing the glass cleaning roller unit, the following adjustment is necessary.
[1] [2]
[1]
8.3.6 DF control board (DFCB) (DF-629)
1. Remove the rear cover.
G.8.3.2 Rear cover (DF-629)
[4]
5. Remove the C-clip [1], and shift the bushing [2], and remove the belt [3].
6. Remove the glass cleaning roller unit [4].
7. NOTE
▪ When installing the glass cleaning roller unit [2], make sure that the
transparent sheets [1] are outside of the glass cleaning roller unit [2].
▪ Adjust the actuator [1] so that it is positioned where it blocks the light of
the document reading glass cleaning sensor [2], and install the belt.
▪ After completing the above adjustment, when you turn ON the main
power switch, make sure that the shaft [1] is at the correct position (home
position).
G-208
G DISASSEMBLY/REASSEMBLY > 8. Option