Konica Minolta bizhub C658 Service Manual page 448

bizhub C658/C558/C458/C368/C308/C258
[3] [2]
[1]
9. To reinstall, reverse the order of removal.
6.5.18 Developing motor (M21)
1. Remove the duct cover.
G.6.2.23 Duct cover/1
G.6.2.24 Duct cover/2, filter assy
2. Remove the toner filter.
F.8.1.1 Replacing the toner filter
3. Remove the lower rear cover.
G.6.2.21 Lower rear cover
4. Remove the protective shield.
G.6.2.26 Protective shield
5. Open the PWB box/1.
G.6.3.9 How to open the PWB box/1
[3] [1]
[2] [1]
7. To reinstall, reverse the order of removal.
6.5.19 Paper feed motor (M22)
1. Remove the duct cover.
G.6.2.23 Duct cover/1
G.6.2.24 Duct cover/2, filter assy
2. Remove the toner filter.
F.8.1.1 Replacing the toner filter
3. Remove the lower rear cover.
G.6.2.21 Lower rear cover
4. Remove the protective shield.
G.6.2.26 Protective shield
5. Open the PWB box.
G.6.3.9 How to open the PWB box/1
6. Remove the high voltage unit.
G.6.4.11 High voltage unit (HV)
[1]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
8. Remove three screws [1]. Disconnect the connector [2], and remove the tray 2
lift-up motor [3].
6. Remove four screws [1]. Disconnect the connector [2], and remove the
developing motor [3].
7. Remove the cable from the cable guide [1].
G-148