Konica Minolta bizhub C658 Service Manual page 296

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
[3]
[5]
[1]
[4]
[2]
[5]
[3]
11. To reinstall, reverse the order of removal.
24.1.4 Cleaning the upper paddle (FS-536SD)
(1) Periodically cleaning parts/cycle
• Upper paddle: Every 300,000 counts
(2) Procedure
1. Remove the saddle unit.
Saddle unit (FS-536SD)
2. Remove the front cover.
G.8.17.1 Front cover (FS-536SD saddle section)
[1]
[2] [1]
F PERIODICAL MAINTENANCE > 24. Periodical maintenance procedure FS-536/
9. Remove the paddle assy. (Front) [1], the paddle assy. (Center) [2] and the
paddle assy. (Rear) [3].
10. NOTE
[6]
[4]
[6]
3. Remove three screws [1], and remove the tri-fold guide motor assy [2].
▪ When reinstalling the paddles, be careful not to attach them at an
incorrect location or in an incorrect orientation.
[1]: Paddle Assy. (Front)
[2]: Paddle Assy. (Center)
[3]: Paddle Assy. (Rear)
[4]: Paddle (Long)
[5]: Paddle (Middle)
[6]: Paddle (Short)
F-108
FS-536SD