Konica Minolta bizhub C658 Service Manual page 704

bizhub C658/C558/C458/C368/C308/C258
[2]
[1]
7. Remove the rear cover of the finisher.
Rear cover (FS-537/FS-537SD)
[2]
[1]
[1]
[3]
[2]
[1]
[1]
[2]
[3]
[2]
[1]
6. Remove four screws [1] and remove the plate [2].
8. Remove two screws [1] and remove the board cover [2].
9. Disconnect three connectors [1].
10. Remove the harness from two wire saddles [2] and the clamp [3].
11. Remove the harness from harness guide [1].
12. Remove the harness from five wire saddles [2].
NOTE
▪ Place the harness clamp [3] between the two top wire saddles when
installing.
13. Disconnect the connector [1].
G-404
G DISASSEMBLY/REASSEMBLY > 8. Option