Konica Minolta bizhub C658 Service Manual page 278

bizhub C658/C558/C458/C368/C308/C258
19. Periodical maintenance procedure FS-533
NOTE
▪ The alcohol described in the cleaning procedure of maintenance represents the isopropyl alcohol.
19.1 Paper exit section
19.1.1 Cleaning procedure for each parts
(1) Periodically cleaning parts/cycle
• Each rollers/Each rolls: Every 300,000 counts
(2) Cleaning point
NOTE
▪ Do not clean the alignment roller F/R.
19.1.2 Cleaning the paper exit paddle
(1) Periodically cleaning parts/cycle
• Paper exit paddle: Every 300,000 counts
(2) Procedure
[1]
19.2 Alignment section
19.2.1 Replacing the alignment roller assy F/R
(1) Periodically replacing parts/cycle
• Alignment roller assy F/R: Every 1,000,000 counts
[1]
[2]
[1] Alignment roller assy R
(2) Removal procedure
1. Remove the front cover.
F PERIODICAL MAINTENANCE > 19. Periodical maintenance procedure FS-533
1. Using a cleaning pad dampened with alcohol, wipe the paper exit paddle [1].
[2] Alignment roller assy F
F-90