Konica Minolta bizhub C658 Service Manual page 324

bizhub C658/C558/C458/C368/C308/C258
[1]
[1]
[2]
[1]
12. To reinstall, reverse the order of removal.
NOTE
▪ When installing the right door unit, align it with the guide lines drawn on the scales indicated on the machine frame. Open
and close the right door to check for any interference and correct if necessary.
5.3.6 Manual bypass tray unit
1. Open the right door.
[1]
[2]
[1] [1]
[1] [2] [1]
G DISASSEMBLY/REASSEMBLY > 5. bizhub C368/C308/C258
9. Draw the gauge line to the hinge mounting part [1] along the cutout of the
hinge on the frame of the main body.
10. Remove three screws [1], and remove the hinge (upper section) [2].
11. Hold up the right door unit [1] to remove it.
2. Remove the screw [1], and remove the shaft holder/1 [2].
3. Remove 10 screws [1], and remove the vertical transport roll assy [2].
G-24