Konica Minolta bizhub C658 Service Manual page 248

bizhub C658/C558/C458/C368/C308/C258
10.1.3 Replacing the paper feed assy.
(1) Periodically replacing parts/cycle
• Paper feed assy.: Every 200,000 counts
NOTE
▪ At replacing the rollers, the paper feed assy. (pick-up roller + feed roller) and the separation roller assy. must be replaced at
the same time. Otherwise, the pick-up roller, feed roller , and separation roller assy. must be replaced at the same time.
(2) Procedure
[1]
[3]
[2]
4. To reinstall, reverse the order of removal.
10.1.4 Replacing the pick-up roller/feed roller
(1) Periodically replacing parts/cycle
• Pick-up roller: Every 200,000 counts
• Feed roller: Every 200,000 counts
NOTE
▪ At replacing the rollers, the paper feed assy. (pick-up roller + feed roller) and the separation roller assy. must be replaced at
the same time. Otherwise, the pick-up roller, feed roller, and separation roller assy. must be replaced at the same time.
(2) Procedure
1. Remove the paper feed assy.
F.10.1.3 Replacing the paper feed assy.
[2]
[1] [2]
[1]
[1]
[3]
F PERIODICAL MAINTENANCE > 10. Periodical maintenance procedure DF-629
1. Open the left cover [1].
2. Release the lock [1].
3. Release two tabs [2], and remove the paper feed assy. [3].
2. Remove the E-ring [1] and the gear assy [2].
NOTE
▪ When reinstalling the gear assy [2], push the gear assy [2] into
position while rotating it.
3. Remove the pin [1].
NOTE
▪ Be careful not to lose the pin [1].
4. Remove the C-clip [2], and remove the lever [3].
F-60