Konica Minolta bizhub C658 Service Manual page 751

bizhub C658/C558/C458/C368/C308/C258
[3] [1]
[2]
[2]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
19. Select [Service Mode] -> [Billing Setting] -> [Management Function Choice] -> [Key Counter Only] or [Vendor 2] (Use the key counter and
the vendor 2 together). Then, set the relative items.
For details on setting, see "
(2) Key counter kit KIT-CF (4623-484)
1. Remove the scanner right cover.
G.6.2.2 Scanner right cover
[3]
[3]
I.8.3.2 Management Function
G DISASSEMBLY/REASSEMBLY > 9. COMMERCIALLY AVAILABLE PARTS
11. Pass the key counter harness through the hole [1] in the scanner right cover.
12. Mount the scanner right cover [2] using three screws [3].
13. Using two screws [2], secure the counter mounting bracket [1].
NOTE
▪ Secure the counter mounting bracket passing the connector into
the bracket.
▪ Use two long screws (V116 0418 14: M4 x 18) in the key counter kit
to secure the counter mounting bracket.
14. Insert the key counter socket [1].
15. Mount the edge cover [2] to the counter mounting bracket and set the
harness to the edge cover.
16. Connect the key counter socket connector [3].
17. Using two screws [2], secure the key counter socket [1].
18. Using two screws [2], secure the key counter cover [1].
Choice".
G-451