Konica Minolta bizhub C658 Service Manual page 651

bizhub C658/C558/C458/C368/C308/C258
• Be careful not to jam your finger in the connecting section
of the pantograph.
1. Remove the finisher.
G.8.16.6 Finisher (FS-536/FS-536SD)
2. Remove the front door of the finisher.
G.8.16.2 Front door (FS-536/FS-536SD)
4. Remove the finisher left lower cover.
Left lower cover (FS-536/FS-536SD)
5. Remove the finisher front upper cover.
G.8.16.3 Front upper cover (FS-536/FS-536SD)
6. Remove the finisher front lower cover.
G.8.16.5 Front lower cover (FS-536/FS-536SD)
[1]
[2]
[1]
CAUTION
3. Pull out the saddle unit [1].
[1]
7. Disconnect three connectors [1].
8. Remove the screw [1], and remove the pantograph [2].
G-351
G DISASSEMBLY/REASSEMBLY > 8. Option