Konica Minolta bizhub C658 Service Manual page 587

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
[1]
[2]
[3]
[1] [2]
[3]
[2]
[1]
[5]
[4]
[1]
9. Insert the lift wire/L [2] to the right hole [1] on the front face.
10. Set the lift wire/L [2] to the near side groove [1] on the wire pulley and secure
it with the E-ring [3].
11. Insert the lift wire/S [2] to the left hole [1] on the front face.
12. Set the lift wire/L [2] to the near side groove [1] on the wire pulley, and set
the lift wire/S [4] to the far side groove [3] and secure them with the E-ring
[5].
13. NOTE
▪ They are properly fixed if both edges of the wire [1] are placed at
the same position.
G-287
G DISASSEMBLY/REASSEMBLY > 8. Option