Konica Minolta bizhub C658 Service Manual page 680

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
[1]
[1] [1]
[3]
[4]
10. Remove the alignment motor/rear.
G.8.19.24 Alignment motor/rear (M13) (FS-537/FS-537SD)
[2]
[3]
[1]
[1]
[3]
[4]
8. Remove eight screws [1] and remove the paper exit part [2].
9. NOTE
▪ During installation, place the metal plate part [3] shown in the
illustration on top of the dowel [4].
11. Remove the harness from the wire saddle [1].
12. Remove two screws [2] and remove the alignment plate [3].
NOTE
▪ When removing, be careful not to drop the alignment plate.
G-380
G DISASSEMBLY/REASSEMBLY > 8. Option