Konica Minolta bizhub C658 Service Manual page 731

bizhub C658/C558/C458/C368/C308/C258
[1]
[1]
[2] [1]
[1]
[2] [1]
[4]
[3]
[2]
[2]
11. To reinstall, reverse the order of removal.
8.33 Disassembly/reassembly procedure (HD-524)
8.33.1 Hard disk (B) (HD-524) (bizhub C368/C308/C258)
1. Remove the lower rear cover.
G.5.2.20 Lower rear cover
2. Remove the protective sheet.
G.5.2.21 Protective sheet
[1]
[4]
[3]
[1]
3. Remove the USB cable and harness from the wire saddle [1].
4. Disconnect two connectors [1] of the Line 2.
5. Remove the harness and USB cable from the cut-out section [2] in the cover
6. Disconnect two connectors [1] from Line 1.
7. Remove the harness and USB cable from the cut-out section [2] in the cover
8. Remove the screw [1], and remove the connector cover [2].
NOTE
▪ When installing the connector cover, insert the protrusion [3] on the
connector cover into the holes [4] by taking care not to trap the
harness.
9. Remove two screws [1], and remove the Fax Kit (Line1) [2].
10. Remove two screws [3], and remove the Fax Kit (Line2) [4].
G-431
G DISASSEMBLY/REASSEMBLY > 8. Option