Konica Minolta bizhub C658 Service Manual page 269

bizhub C658/C558/C458/C368/C308/C258
[1]
[2] [3]
[1]
[2] [3]
[1]
5. To reinstall, reverse the order of removal.
16.1.3 Replacing the separation roller
(1) Periodically replacing parts/cycle
• Separation roller: Every 300,000 counts
(2) Procedure
1. Open the upper door.
[1]
[2]
[1]
F PERIODICAL MAINTENANCE > 16. Periodical maintenance procedure LU-207
2. Move the feed roller [1] up.
3. Remove two C-clips [1], the bushing [2] and remove the feed roller assy [3].
4. Remove three C-clips [1], the actuator [2] and remove the feed roller [3].
2. Move the feed roller [1] up.
3. Remove four screws [1], and remove the plate [2].
F-81