Konica Minolta bizhub C658 Service Manual page 539

bizhub C658/C558/C458/C368/C308/C258
[1]
3. Remove the tray 3 and tray 4.
G.8.5.4 Tray 3, tray 4 (PC-110/PC-210)
[1] [2]
[1]
[1] [2]
[3]
7. To reinstall, reverse the order of removal.
8.5.13 Tray 3 paper feed motor (M111), tray 4 paper feed motor (M121) (PC-110/PC-210)
NOTE
▪ The tray 3 paper feed motor and the tray 4 paper feed motor are of the same form and mechanism. This procedure shows the
steps taken for the tray 3 paper feed motor.
1. Remove the rear cover.
G.8.5.3 Rear cover (PC-110/PC-210)
[3]
[1]
[1]
[2] [1]
5. To reinstall, reverse the order of removal.
[1]
[2]
2. Disconnect the connector [1] on the PC control board.
4. Remove three screws [1], and remove the tray 4 lift-up motor assy [2].
5. Disconnect the connector [1].
6. Remove the screw [2], and remove the tray 4 CD paper size board [3].
2. Remove three screws [1].
3. Disconnect the connector [2], and remove the tray 3 paper feed motor assy [3].
NOTE
▪ When mounting the tray 3 paper feed motor assy, use care not to
forget to set the belt to the gear.
4. Remove three screws [1], and remove the tray 3 paper feed motor [2].
G-239
G DISASSEMBLY/REASSEMBLY > 8. Option