Konica Minolta bizhub C658 Service Manual page 786

bizhub C658/C558/C458/C368/C308/C258
Key name
2.3.8 Change E-Mail Address
NOTE
▪ Keys displayed on screens are different depending on the setting.
▪ For details of the utility functions, refer to "User's Guide."
Key name
Change E-Mail Address
2.3.9 Register Authentication Information
NOTE
▪ Keys displayed on screens are different depending on the setting.
▪ For details of the utility functions, refer to ''User's Guide.''
Key name
Register Authentication It will be displayed when user authentication (MFP) is completed and the following is met;
Information
2.3.10 Synchronize User Auth. and Account Track
NOTE
▪ Keys displayed on screens are different depending on the setting.
▪ For details of the utility functions, refer to "User's Guide."
Key name
Synchronize User Auth.
and Account Track
2.3.11 Registered Application Settings
NOTE
▪ Keys displayed on screens are different depending on the setting.
▪ For details of the utility functions, refer to ''User's Guide.''
Key name
Select Default Start This option is available when the OpenAPI application is registered in the machine while the registered user logs
Application in to the machine with enhanced server authentication.
2.3.12 Change PIN Code
NOTE
▪ Keys displayed on screens are different depending on the setting.
▪ For details of the utility functions, refer to ''User's Guide.''
Key name
Change PIN Code It will be displayed when [Administrator Settings] -> [User Authentication/Account Track] -> [General Settings] ->
[Synchronize User Authentication & Account Track] is set the user's PIN code.
2.4 Administrator Settings List [1/2]
2.4.1 Administrator settings outline 1/2
NOTE
▪ The Administrator Settings will be available by entering the administrator password (16 digits) set by the Administrator Settings
or Service Mode. (The administrator password is initially set to "1234567812345678.")
▪ When [Administrator Settings] -> [Security Settings] -> [Enhanced Security Mode] is set to "ON", entering the incorrect
administrator password three times will cause access lock. The access lock is released after the lapse of a predetermined period
of time (Default setting: 5 min.) after the main power switch is turned OFF and then ON more than 10 seconds later. The access
lock can be released by [Service Mode] -> [Enhanced Security] -> [Administrator unlocking].
▪ For details of the utility functions, refer to " User's Guide ."
• When [Administrator Settings] -> [Security Settings] -> [Enhanced Security Mode] is set to "ON", entering
the incorrect password three times will cause access lock.
• When conducting user authentication (MFP only), it will be displayed when the authentication is complete.
• It will be displayed when [Administrator Settings] -> [Security Settings] -> [Administrator Security Levels] is set
to "Level 2."
• [Biometric/IC Card Info. Registration] is set to "Allow" in [Administrator Settings] -> [System Settings] ->
[Restrict User Access] -> [Restrict Access to Job Settings].
• [Biometric/IC Card Info. Registration] is set to "Allow" in [Administrator Settings] -> [User Authentication/
Account Track] -> [User Authentication Settings] -> [User Registration] -> [Edit] -> [Function Permission/
Authority] -> [Function Permission].
• When conducting user authentication (ON (MFP), External Server Authentication, or Main + External Server),
it will be displayed only when the authentication is complete.
• It will be displayed when [Administrator Settings] -> [User Authentication/Account Track] -> [General Settings]
-> [Synchronize User Authentication & Account Track] is set to "Synchronize by User."
I ADJUSTMENT/SETTING > 2. List of utility mode
Function/Precondition
Function/Precondition
Function/Precondition
Function/Precondition
Function/Precondition
Function/Precondition
I-16