Konica Minolta bizhub C658 Service Manual page 919

bizhub C658/C558/C458/C368/C308/C258
Switch Function
No.
069 When printing using the manual
bypass tray in a custom size,
allows for printing only with a
printer driver settings.
070 Setting for alarm sound and screen
display for communication errors
occurring due to CSRC causes.
072 Import/export function of the
address book through the USB
memory
121 Operation when a double feed is
detected, with ADF used.
124 Function to restrict the file type of
TX Fax
135 Setting for ID length of the HID
Prox card
143 Expansion setting of the touch
panel sensitive area when the web
browser function is used *1
145 Switching to Auto detection for
paper size in manual bypass tray
Displaying message when the
paper size in manual bypass tray is
mismatched with the paper size
specified on the control panel
Setting value
Bit HEX
Assignment Assignment
00010000 10 Does not show the life
warning/replace display of
the photo conductor unit.
00100000 20 Does not show the life
warning/replace display of
the developing unit.
01000000 40 Does not show the life
warning/replace display of
the transfer roller unit.
10000000 80 Does not show the life
warning/replace display of
the fusing unit.
00000000 00 After setting a paper in the
manual bypass tray, touch
[complete] key to start
printing.
00000001 01 Start printing with the
paper settings specified
by the printer driver as the
manual bypass tray paper
settings without giving a
warning.
00000000 00 Communication error
sound/screen display
enabled.
00010000 10 Communication error
sound/screen display
disabled.
00000000 00 Import/export function is
disabled.
00000100 04 Import/export function is
enabled.
00000000 00 Stops instantly
00000010 02 Stops after outputting
originals
00000000 00 Restrict the file type.
00000001 01 Do not restrict the file
type.
00000000 00 Reports that the 1st byte
shows the ID length of the
card, the 2nd byte and
after shows the card ID.
00000001 01 Reports the card ID with
the ID length including the
1st byte.
00000000 00
00000001 01
00000010 02
00000000 00 Enable
00000001 01 Disable
00000000 00 Enable
00000100 04 Disable
I-149
I ADJUSTMENT/SETTING > 5. SERVICE MODE
Default value
(Bit/HEX)
Details
00000000 / 00 -
00000000 / 00 -
00000000 / 00 -
00000000 / 00 -
00000000 / 00 -
00000000 / 00 -
• 26 dots 00000000 / 00
: 26 dots from the
perimeter of the
touch panel is a
nonsensitive area.
• 16 dots
: 16 dots from the
perimeter of the
touch panel is a
nonsensitive area.
• 9 dots
: 9 dots from the
perimeter of the
touch panel is a
nonsensitive area.
00000000 / 00 -
00000000 / 00 -
Reference
• C.1.10 Web
browser
function